{"id":150490,"date":"2022-12-07T06:08:57","date_gmt":"2022-12-07T06:08:57","guid":{"rendered":"https:\/\/harchi90.com\/dekatron-clock-tells-the-time-sans-semiconductors\/"},"modified":"2022-12-07T06:08:57","modified_gmt":"2022-12-07T06:08:57","slug":"dekatron-clock-tells-the-time-sans-semiconductors","status":"publish","type":"post","link":"https:\/\/harchi90.com\/dekatron-clock-tells-the-time-sans-semiconductors\/","title":{"rendered":"Dekatron Clock Tells The Time, Sans Semiconductors"},"content":{"rendered":"
\n <\/p>\n
\n

Over the years, there have been several memory and display technologies that served a particular niche for a while, only to be replaced and forgotten when a more suitable technology came along. One of those was the dekatron: a combination memory and display tube that saw some use in the 1950s and ’60s but became obsolete soon after. Their retro design and combined memory\/display functionality make them excellent components for today’s clock hackers however, as [grobinson6000] demonstrates in his Dekaclock project.<\/p>\n

A dekatron tube is basically a neon tube with ten cathodes arranged in a circle. Only one of them is illuminated at any time, and you can make the tube jump to the next cathode by applying pulses to its pins. The Dekaclock uses the 50 Hz mains frequency to generate 20 ms pulses in one tube; when it reaches 100 ms, it triggers the next tube that counts hundreds of ms, which triggers another one that counts seconds, and so on with minutes and hours.<\/p>\n

The Dekaclock uses no semiconductors at all: the entire system is built from glass tubes and passive components. However, [grobinson6000] also built an auxiliary system, full of semiconductors, that makes the clock a bit easier to use. It sits on top of the Dekaclock and automatically sets the correct time using a GPS receiver. It also keeps track of the time displayed by the dekatrons, and tells you how far they have drifted from their initial setting.<\/p>\n

Both systems are housed in sleek wooden cases that perfectly fit the tubes’ retro aesthetic. [grobinson6000] was inspired to make the Dekaclock after watching another dekatron clock we featured earlier, and designed the GPS receiver to work alongside it. Dekatrons are surprisingly versatile devices: you can use them to make anything from internet speed gauges to kitchen timers.<\/p>\n

<\/p>\n